Installation · Joinery
Roller Shutters and Security Shutters
A roller shutter sits outside the window and, when lowered, blocks sun, heat and the view in from outside. A security shutter works on the same principle to close a commercial frontage, built stronger because its purpose is security. In both cases the system is chosen around how often it will be used.
Scope
What we do
We handle the work below from one place. Surveys and quotations are free in Kemalpasa and the surrounding area.
- Manual (belt or crank) roller shutter installation
- Motorised shutter installation and remote control setup
- Security shutters for shops and business premises
- Slat and belt replacement on existing shutters
- Motor replacement and fault repair
- Cleaning boxes and guide rails, freeing jammed shutters
- On-site measuring and system recommendation
What We Watch For
The details that decide the quality
Motorised systems need power at the box
A motorised shutter needs an electrical supply run to the side of the box. During a renovation the wall is already open, so it is straightforward; done afterwards it means chasing a channel into the wall. This is why the shutter decision belongs in the renovation plan.
The box takes up window height
The shutter box sits above the window and reduces the visible height of the glass a little. We look at that together when measurements are taken.
Security class matters on shutters
On commercial shutters, slat thickness and the locking system decide the level of security directly. For businesses with high-value window displays we discuss this at the start.
Related Work
Usually carried out alongside
FAQ
Answers before you ask.
Can my existing shutter be motorised?
In most cases yes: if the existing box and slats are suitable, the belt system comes out and a motor goes in. The size of the box and the weight of the slats decide it, so we open the box and check during the survey.
Do shutters provide insulation?
A closed shutter creates a pocket of air between the window and the outside, which reduces heat loss somewhat and blocks solar heat in summer. It does not replace insulated joinery, but alongside it the difference in comfort is clear.
When a shutter fails, repair or replace?
Motors, belts and individual slats can usually be replaced; a full system renewal is not needed for every fault. We diagnose the fault first and tell you honestly which one makes sense.
Where We Work
Wherever you are in Kemalpasa and around it, we come to you.
Our shop is in the Sekiz Eylul neighbourhood of Kemalpasa. We work across a wide area: the central neighbourhoods, the surrounding towns and the neighbouring districts.